Maximum Demand As3000 (2025)

| Load | AS3000 Rule | Calculation | Result (A) | |------|-------------|-------------|-------------| | Lighting | C5: First 10A @100%, rest @50% | 10 + (10×0.5) | 15 | | Sockets (2 circuits) | C6: 10A + 50% of remaining (16 outlets = 16A assumed total) | 10 + (6×0.5) | 13 | | Cooktop | C8: (0.4 × 27.8) + 10 | 11.1 + 10 | 21.1 | | Oven | C8: (0.4 × 20) + 10 | 8 + 10 | 18 | | Hot water | C7: No diversity (storage) | 15.6 | 15.6 | | AC | C9: Largest unit 100% | 16 | 16 |

This shifts MD from a static calculation to a . Final Thought Maximum Demand is not about what could happen. It is about what reasonably will happen over 30 minutes, under normal use. Master the diversity tables, respect harmonics, and understand the economic consequences. That is the difference between a compliant design and an optimal one. maximum demand as3000

Let's move beyond Table C1 and explore the why behind the clauses. Maximum Demand: The greatest expected load current (in amperes) or apparent power (in kVA) that will flow in a circuit, switchboard, or supply main under normal operating conditions for a defined period (typically 30 minutes). Key nuance: Normal operating conditions excludes fault currents or motor starting transients. The "30-minute" window aligns with thermal time constants of cables and transformers. 2. Why MD Matters More Than You Think A. Voltage Drop (Clause 3.6.2) Voltage drop is calculated using load current derived from Maximum Demand , not the sum of breaker ratings. Using breaker totals leads to oversized cables and non-compliance (VD will be too low to measure, but that’s not the point—economy is). B. Transformer and Service Sizing The supply authority (Distributor) uses your MD calculation to size their pole transformer and service mains. Overstate MD → you pay higher demand charges. Understate MD → nuisance tripping of main switch or service fuse. C. Main Switch and Busbar Rating Clause 2.3.2 requires the main switch to have a current rating not less than the calculated MD of the installation. 3. The Methodology: Clause C2 (Informative but De Facto Mandatory) Appendix C provides three methods. In practice, you use a hybrid approach. Method 1: Assessment of Load (Clause C2.2) For each final subcircuit, you apply a diversity factor . This is where 90% of errors occur. | Load | AS3000 Rule | Calculation |